Pressure Washer Sandblaster Removes Paint And Rust

If you are wondering why you might want a pressure washer with the sandblaster attachments, you must know that these attachments work excellently in drawing the abrasive grit for the removal of rust and paint. Moreover, the sand used in the pressure washer sandblaster is kiln dried silica sand, which is used for block paving. You simply have to ensure that the sand is kept bone dry.

When handling the pressure washer sandblaster, it is advisable for you to wear protective eye gear and shield your eyes.

Pressure washer sandblaster – the various kinds

- Heavy Duty Sand Blasters: This kit usually includes features like a metal probe, an adjustable sand intake, carbide nozzle, 20.5 ft of 3/4" sand hose, 1/4" connecting plug and hose clamp.
- Medium Duty Sand Blasters: This ready to operate kit includes features like 20 ft hose, a 1/4" connecting plug and other features.
- Industrial Sand Blasters: The industrial sandblasting kit comes with a sandblasting nozzle and a sand probe.

The manner of sandblasting

You have to connect as well as open the water supply line before you start the pressure washer. Next, you need to trigger the gun for relieving the air in the equipment. After carefully going through the instruction manual, start the pressure washer sandblaster. Last, trigger the gun for activating the spray.

Other facts to know about the pressure washer sandblaster

You need to check the distance maintaining which you have to spray from the surface. When you are not spraying, make sure that the nozzle is pointed downwards - this stops water from entering the sand supply. If by chance, water manages to enter in the sand supply hose, get the probe removed from the sand and hold the gun trigger open, this will air-dry the hose.

The wet sandblasting is a great way for removing the old paint and rust very fast from the stone and metal surfaces. This will provide you with a clean and smooth surface for repainting.