Americlean: Highly Qualified
Industrial Painting Contractors!
Industrial painting contractors are NOT all alike.
Services include industrial spray painting and sandblasting, secondary
chemical containment, epoxy
polyurethane floor coatings and more. The industrial
painting specialists at Americlean take the time to understand
exactly what your industrial painting job entails in order
to provide you with:
- An Accurate Proposal: Americlean
will provide you with a detailed proposal outlining the
materials and processes that will be used to complete
your industrial building or property painting project.
- Timely and Quality Professional Service: Americlean
industrial painters deliver quality, on-time and safe
painting services.
- Quality Assurance: Americlean’s Foreman
will walk through the job with you upon completion to
ensure the project was completed exactly as expected
- Quality Service Report: Americlean
requests you to provide us with feedback so we can continue
to improve and deliver excellent service.
Industrial Painting Applications Include:
- Enamel Paint
- Latex Paint
- Paint Sealers
- Urethanes
- Heat Resistant Paint
- Acrylic Paint
|
- Mastic Paint
- Stains
- Elastomeric Paint
- Dryfall Paint
- Multicolor Paint
|
|
Not sure which type of paint or finish is right for painting
industrial properties or facilities? Americlean’s professional
painters will help you determine the finish best suited
to your needs.
Americlean is a member of The Society for Protective Coatings
(SSPC). Our industrial painting specialists and industrial
spray painting professionals are well qualified to specify,
prepare and complete your industrial painting and sandblasting
job. We take SSPC standards seriously and uses a variety
of techniques in order to make sure your Industrial building
or surface has been properly prepared for coating.
Americlean prepares surfaces for painting with the latest in industrial sandblasting techniques, including soda, sand and dry ice blasting, water (hydro) blasting, mechanical or hand prep as required.
Once Americlean’s professional industrial painters have prepared the surface, they will apply the paint using spray, brush or roll techniques, depending on surface, environmental and property requirements. Whether you are painting a floor, walls, fixtures, water or fuel tanks at your industrial building, facility or manufacturing plant, you are sure to be pleased by the highest quality of professional service and quality.
Practicing Member of the Society for Protective Coatings
Americlean stays up to date with changing protective coatings industry through the SSPC. Belonging to this respected industry society helps Americlean enhance job performance, strengthen professional credibility and demonstrate commitment to safety as an industrial painting contractor.
The SSPC reviews and approves contractors’ ability to
provide quality work while following the applicable safety,
health and environmental compliance standards. As an industrial
painting contractor, Americlean is proud to work in accordance
with the SSPC and the standards set by the regulatory organizations.
Americlean applies professional SSPC certification and
education and understands that the key to a successful
industrial spray painting job is in the quality of the
preparation of the painting surface. SSPC provides preparation
standards.
Learn
more about Americlean
To ensure quality on every project, Americlean applies SSPC Preparation Standards to all Industrial Painting projects. H2: SSPC Industrial Painting Preparation Standards
SSPC Preparation Standards For Industrial Painting Jobs
SSPC-SP1 |
Remove oil, grease, dirt, soil, salts and other surface contaminants using appropriate cleaning solvents and clean rags, vapor, alkali, emulsion or steam and adequate ventilations. |
SSPC-SP2 |
Remove loose rust, mill scale, and paint to the degree specified by hand chipping, scraping, sanding and wire brushing |
SSPC-SP3 |
Remove loose rust, mill scale and paint to the degree specified by power tool chipping, descaling, sanding wire brushing and grinding |
SSPC-SP5 |
Removal all visible rust, mill scale paint and foreign matter by white-metal blast cleaning with wheel or nozzle (dry or wet) using sand, grit or shot. |
SSPC-SP6 |
Remove all visible rust, mill scale, paint and foreign matter by commercial blast cleaning until at least 2/3 of each element of the surface is free of all visible residues. |
Request An Industrial Painting Proposal
Americlean is also a leading Upstate NY commercial painting contractor and provides commercial cleaning services that adhere to the highest industry standards.
For more information on Americlean industrial
painting contractor, or specific industrial cleaning needs
such as commercial kitchen cleaning, sandblasting, or secondary
chemical containment, contact
us online or call (518) 793-9274 for Americlean
New York, or (802) 728-5551 in New England.
|
